I am running a z20 with a 10 inch hydro jack plate, but only turning 5400-5500 rpms with a 26 raker...runs gps 70.4, but not getting any rpms...any help would be great.
Thanks
Printable View
I am running a z20 with a 10 inch hydro jack plate, but only turning 5400-5500 rpms with a 26 raker...runs gps 70.4, but not getting any rpms...any help would be great.
Thanks
I think thats the right prop, sounds like your motor is too low.
You can turn it more RPM's but it may hurt the fuel and oil consumption.