Water Pressure on a 1996 Evinrude Intruder 150hp
I am getting a new water pressure gauge. (My old one the arrow fell off inside the glass)
Curious at Idle in my back yard with a hose, just in testing the gauge and all, it should show at least maybe 1-5 lbs of pressure right?
And what about WOT ??? I have noticed all the 30lb gauges are set to where 15 is in the middle and highlighted or notated, does that mean 15 is a good mark to be at ?
Thanks. Know nothing of water pressure other than motor needs to be peeing.
Re: Water Pressure on a 1996 Evinrude Intruder 150hp (kisskollector)
It might show some presure on garden hose, mine will show maybe 1 or 2 lbs nothing much. As far as WOT I am thinking 18lbs is close to the min. you want. 15 lbs sounds a little low to me. http://xs-s.com/zf/images/smile/emthup.gif
Re: Water Pressure on a 1996 Evinrude Intruder 150hp (kisskollector)
I have a 96 model and on the muffs it will show right at 9 lbs and wot it is running about 25. My pad to center is set dead on 3.0 inches. Readings were from week ago after new pump install..........................Roger http://www.bassboatcentral.com/boardstuff2/beers.gif
Re: Water Pressure on a 1996 Evinrude Intruder 150hp (The Green Hornet)
THANKS !!!
Got the new one installed and shot right up to 9lbs of water pressure.
(I had a new Impeller installed late last year.)
Thanks a lot !!
http://www.bassboatcentral.com/smileys/USA1.gif