Trolling Motor mounting challenges? Too much "overhang"? Here's the solution!

Do you have a challenging trolling motor installation because of the design/layout of your boat's deck? https://ci4.googleusercontent.com/pr...5/16/1f914.png



Are you looking for a simple way to PROTECT and keep your expensive trolling motor safe?! https://ci5.googleusercontent.com/pr...5/16/1f62f.png



Are you trying to avoid drilling SEVERAL new holes in the deck? https://ci6.googleusercontent.com/pr...5/16/1f97a.png



If you answered "YES" to any of these questions, our custom RETRACTABLE mounts can offer you a simple solution! https://ci6.googleusercontent.com/pr...5/16/1f9d0.png



ShuttleSlide easily retracts your motor into the boat (you decide how much you need). Our mount can sit further back on the deck (making the installation easier) and when installing a 7" or 9" UHD or EXD mount, there are only 4 NEW holes in the deck https://ci3.googleusercontent.com/pr...5/16/1f632.png (If you would like to re-use the existing holes in your deck, we can help with that too).

www.shuttleslide.com



Are you ready to speak to us about your installation? https://ci5.googleusercontent.com/pr...5/16/1f4de.png 321.345.3315 - our knowledgeable staff will answer your questions.

All of our retractable mounts have a lifetime warranty - proudly made in the USA! Veteran-owned business :salute:

Attachment 530923


Attachment 530925

Attachment 530926

Attachment 530927

Attachment 530928

Attachment 530929

Attachment 530930

If your trolling motor's OVERHANG is something you'd like to solve OR you simply can not mount your trolling motor close enough to the water line to safely deploy the shaft, think about ShuttleSlide's RETRACTABLE trolling motor mount with built in quick release. It's not just a regular trolling motor mount, it slides your motor inboard, past the rub rail & helps protect it from outside interference (bow rollers when loading/unloading, docks, other vessels, guide poles, obstacles in the water) and has a quick release function if you ever need to remove the motor off the boat.

What makes the ShuttleSlide mount stand out from the rest?

1. Retracts your trolling motor 7" - 35" inboard from your deployed position. You can choose how much length you need for boat. It's NOT one-size-fits-all.
2. The front of our mounts can be placed SEVERAL inches INSIDE the edge of the boat and we will make sure your shaft still clears the rub rail by 1" - 1.5".
3. Lifetime Warranty - we stand behind our USA made products
4. No metal to metal friction - Since our metal brackets do not slide along a metal track, it is smooth and quiet as it travels back and forth in the mount.
5. Easy to use - no pins to pull or knobs to turn
6. We have adapter plates that allow you to reuse your existing bolt hole pattern - no new holes in the deck.
7. #1 customer service support - we will call you back, even after-hours and on weekends
8. Our mounts can be used with ANY bow mounted trolling motor - up to 108" shaft length (scissor style mounts like the Force, Ultrex, Ghost will need our TMA-1 adapter).

Start here: www.shuttleslide.com/shop
Email us with questions: support@shuttleslide.com

Made in the USA

Attachment 533040

Attachment 533041

Attachment 533042

Attachment 533043

Attachment 533044

Question about the HB Quest motors. HB has a new line of slide/quick detach mounts. They say to withstand the increased torc of their new brushless motors. Have you tested with those new motors? I would hate to have it break loose in 200’ of water. By the way does your warranty cover the loss of the new motor if it falls in? Bob

Hello!

We test our mounts at forces well in excess of what motors you can buy today can produce. Also, for many years our mounts have been supporting the amount thrust and, even longer shaft lengths than what the new Quest motors are available in so compatibility is not a problem.

Our EXD line of mounts is what we currently recommend for 72 - 108" shaft motors with up to 120lbs of thrust and come with a Lifetime warranty on the mount. While other mounts have a sliding action/mechanism, none are designed to be used like ours is so we encourage people to look into that carefully.

If you have any questions at all, just give us a call!

Thank you!

I have called in the past. You guys are upper shelf. Bob

If you're struggling with how to mount your trolling motor, give us a call for a solution! https://static.xx.fbcdn.net/images/e....5/16/260e.png 321-345-3315



Your project begins here: shuttleslide.com -- SLIDE the motor inboard and keep your expensive investment safe!



"I’m very satisfied with the end result. It gets my trolling motor completely out of the way when loading it on my boat trailer no matter how steep the boat ramp angle is. Satisfied customer." ~Steve E. from Alabama ~ 25’ Nautic Star Bay boat ~ 60" Terrova



Still shopping around for a dependable trolling motor mount?! Give us a try! Compatible with all bow mounted trolling motors. If you are going to be using the new MK Quest motors, give us a call before ordering!

Attachment 536280


Attachment 536281

Attachment 536282

Attachment 536283