2020 Mercury 250proxs prop wrench kit

Does anyone know what the part number for this is? I saw a kit that came with a plastic block and wrench.

Thanks

If you would, please take a moment to review the Forum Announcements and be sure to provide the Required Info (serial number) when posting. Thanks! :beers:

I would not recommend a "plastic" wrench for this purpose. Buy a 1-1/16" deep socket and a breaker-bar or ratchet (better yet, a Torque Wrench). Most of the hub kits used for this engine will torque to 55 lbs/ft (minimum) torque.

Thanks

Quote:

---

Originally Posted by EuropeanAM

If you would, please take a moment to review the Forum Announcements and be sure to provide the Required Info (serial number) when posting. Thanks! :beers:

I would not recommend a "plastic" wrench for this purpose. Buy a 1-1/16" deep socket and a breaker-bar or ratchet (better yet, a Torque Wrench). Most of the hub kits used for this engine will torque to 55 lbs/ft (minimum) torque.

---

^^^:thumb up2:^^^
what he said. I carry a digital torque gauge that goes on the end of a brake over bar.. I checked it against a good torque wrench and it was spot on.