Printable View
I have a 2010 Skeeter FX21. The trim up button in the bow panel does not work (down button works). The indicator light on the button flashes red. The trim controls on the steering column, shifter, and motor, all work. I would appreciate any assistance to repair. Thanks
You clearly still have power to the switch so here is a simple test
The switch should have 3 leads connected on the back
1 power, 1 up and 1 down
Power should be red with blue and green for up/down
Swap the 2 leads for up and down
If you still have down only then the wire for the up most likely has a bad connection at the dash or has been cut somewhere
If you now have up only the switch is bad
NOTE: the switch will work backwards your observing the motor to see if it goes up or down
http://www.bbcboards.net/attachment....8&d=1567730013
Attachment 375878
[QUOTE=MichAngler;10510516]You clearly still have power to the switch so here is a simple test
The switch should have 3 leads connected on the back
1 power, 1 up and 1 down
Power should be red with blue and green for up/down
Swap the 2 leads for up and down
If you still have down only then the wire for the up most likely has a bad connection at the dash or has been cut somewhere
If you now have up only the switch is bad
NOTE: the switch will work backwards your observing the motor to see if it goes up or down
http://www.bbcboards.net/attachment....8&d=1567730013
Attachment 375878[/There are 4 wires total that also control the nav. lights. I think they go back to the brain but I am not sure>QUOTE]