Results 1 to 5 of 5
  1. 07-23-2019, 10:58 AM #1
    Bassinthe360
    Bassinthe360 is offline
    Member
    Join Date
    Jun 2019
    Location
    Silverlake, WA
    Posts
    32

    Adding 2nd console...

    Ordered a 2nd console for my 195 TXW. Will be installing myself. Anybody have any suggestions or lessons learned from adding one previously?
    Seems fairly straight forward...
    Thanks.
    Reply With Quote Reply With Quote
  2. jprovencher80
    jprovencher80 is offline
    Member
    Join Date
    Apr 2018
    Location
    NH
    Posts
    370
    #2 07-23-2019, 01:20 PM
    The second console in my boat was secured with maybe 5or 6 screws. Was simple to remove. Suppose the only advise is to be sure the fastener won't pierce the hull or anything important
    2004 Tracker Avalanche with 150 Mercury XR6
    Reply With Quote Reply With Quote
  3. fivebyfive
    fivebyfive is offline
    Member
    Join Date
    Mar 2018
    Location
    Waterford, Michigan
    Posts
    73
    #3 07-23-2019, 03:39 PM
    I put one on my 195 TXW. It was really very easy. The holes in the bulkhead didn't line up with the holes in the console as I was expecting, but that was a simple fix with a drill. All in I had 30 mins in the install, including figuring out the hole alignment issue.
    Reply With Quote Reply With Quote
  4. Bassinthe360
    Bassinthe360 is offline
    Member
    Join Date
    Jun 2019
    Location
    Silverlake, WA
    Posts
    32
    #4 07-24-2019, 10:13 PM
    Thanks all!
    Reply With Quote Reply With Quote
  5. Backrow461
    Backrow461 is offline
    Member
    Join Date
    Nov 2017
    Location
    Orlando, Fl
    Posts
    3
    #5 07-25-2019, 08:23 PM
    I had one in my 190 secured with about 5 screws as well. Took it out after my dad passed. Now its sitting in my shop. Taking up valuable space. Easy to install and easy to remove.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »