Connecting Hook2 together

[txdyna65]

I currenty have a Hook2 7" tripleshot on my dash. I would like to add another 7" or 9" next to it on the dash. Can they be connected together to use the same transducer?

[Team Colibri]

No.

[txdyna65]

So they dont make small pigtails so you can use one transducer for both units? The Hook2 has worked well, I know there is better, but I was trying to save money and use another hook 2 unit since thats what I have.
I guess I'll have to save up and buy a better unit to put on the console.

[pluggedtheboat]

if you wnat to network two units.. buying a "new" unit for bow would be like buying another hook2/..

you will need two elite ti2 or 2 HDS units.. to share one ducer between two displays..

[Team Colibri]

So they dont make small pigtails so you can use one transducer for both units?

No. That might be technically possible to do, but would require equipment in a much higher pricerange. Networking is a much cheaper way to achive the same result, and as mentioned above Elite Ti2 is the cheapest option with such networking between two units.