Results 1 to 8 of 8
  1. #1
    Member
    Join Date
    Jul 2019
    Location
    New Jersey
    Posts
    24

    Carbon/Smartcraft data

    Carbon 16 with nmea2000 network. Lowrance displays all engine data, however it doesn’t show fault codes. Only shows generic port engine check, etc. Anyway to view the codes that a sc1000 guage or vessselview would show?

  2. Member bloodman's Avatar
    Join Date
    Oct 2008
    Location
    Belvidere, Il
    Posts
    6,005
    #2
    I think you should post this in the Mercury section for Don's answer

  3. Lowrance/Garmin/GPS Moderator fishin couillon's Avatar
    Join Date
    Jun 2004
    Location
    Pineville, La
    Posts
    33,013
    #3
    I dont think its designed to show fault codes.
    YOU are not entitled to what I have earned!!!!!

    2014 Phoenix 619 Pro / 2014 Mercury 200 Pro XS

  4. Member
    Join Date
    Jul 2019
    Location
    New Jersey
    Posts
    24
    #4
    Ok thanks will pick up a vesselview mobile.

  5. Member
    Join Date
    Feb 2018
    Location
    Minnesota
    Posts
    543
    #5
    What device is converting smartcraft to N2K?
    2011 Tracker PT 175 TF
    2011 Merc 60 ELPT 4S

  6. Member
    Join Date
    Jul 2019
    Location
    New Jersey
    Posts
    24
    #6
    Mercury gateway into junction box then into nmea network.

  7. Member
    Join Date
    Feb 2018
    Location
    Minnesota
    Posts
    543
    #7
    Not totally familiar with it... But own and have first hand experience with Mercmonitor, Vessel View Link, and Vessel View Mobile, which all will give fault codes in plain text format.
    2011 Tracker PT 175 TF
    2011 Merc 60 ELPT 4S

  8. Member
    Join Date
    May 2018
    Location
    Rochester, MN
    Posts
    1,014
    #8
    I don’t think the Merc Gateway will show fault codes. I do think the VesselView link will.
    2016 Ranger 1850 LS Reata / Merc 150 4s / SmartCraft / Lowrance HDS Carbon SS3D