I 3D printed this today and thought y’all might like it. I mounted my bow graph over the trolling motor, and wanted to relocate the GPS module off the deck as well. There was an old, broken fishfinder from the previous owner in this location, so I designed the mount to match the existing screw holes. It is adjustable so it can be mounted level. Took about 20 minutes to design and 4 hours to print out. I’m happy with the result and it clears up some deck space. You can see where it was mounted before from the two screw holes in the blue gelcoat.
Here is a link to the pictures:
https://imgur.com/a/eQm5IUf