What is the absolute minimum legnth garage a 21 XRS with merc and folded tongue?

[Jeremy]

Thanks in advance

[Bullet 250]

Around 26ft, I have a 30x35 garage for my 21RDC and I have plenty, but wouldn't want any less, and I never fold my tongue

[adam_p]

24 3/4 feet with the tongue folded and the motor trimmed down with a 300xs on a 16" jack plate.

I put mine in a 20' x 20' garage for a short period when I had 2 boats. It took two of us to put it in there but it fit. The motor was about 2" from the wall and the garage door cleared the folded tongue by a few inches.

[adam_p]

boat garage.jpg

[barbarian]

I have a 21XDC and it fits easy in my 26' storage with tongue folded. My guess is bare minimum 25. Brand of trailer can play a role. Its all about where they install folding tongue

[WVBullet]

To give you an idea: my 21xd (21’10”) with motor on motor toter (half tilt) and tongue straight is 27’ from prop to tip of tongue. If motor was trimmed down and tongue folded, should take off about 2.5’ from normal total. So 24.5’ approx. As Todd and barbarian said, 26’ will (should) work.

[Dan21XRS]

2018 21XRS with a 14" jackplate, 250 Pro XS (2 stroke) and a Boat Mate trailer with tongue folded, I'm right at 24'6"... Dan

[coolwhip]

24' at an angle with my 21xrs with 300 opti...I'd say 25' if not at an angle.