Results 1 to 4 of 4
  1. #1
    Member
    Join Date
    Jan 2008
    Location
    florence ky 41042
    Posts
    412

    j175plssc part# 0335631 grommet for control cables

    there is no medal sleve inside the grommet for control cables,looked at new part # 0335631 has a sleve,question is does the screw connect with the sleve,screw into it? my bolt has no bite,will not stay in place. please help me,thank you all for having aplace like this for the novice boater,rbass57

  2. SC Club Moderator ChampioNman's Avatar
    Join Date
    May 2004
    Location
    Crawfordville, FL/Lake Hartwell, SC
    Posts
    71,248
    #2
    No it does not attach to the sleeve, the sleeve is simply a tube to stiffen the grommet. The screw passes thru.

  3. Member
    Join Date
    Jan 2008
    Location
    florence ky 41042
    Posts
    412
    #3
    thank you sir,where the screw pass thru it has nothing to bite into .guess i can use some kind of caulking and hope it stays in place,just a cosmetic thing with the cover not being screwed on,thanks again,rbass

  4. SC Club Moderator ChampioNman's Avatar
    Join Date
    May 2004
    Location
    Crawfordville, FL/Lake Hartwell, SC
    Posts
    71,248
    #4
    Wouldn't be the first time a screw with a different length was used. The screw attaches to the lower belly pan the elongated side of the grommet extends outside the motor.