Results 1 to 8 of 8
  1. #1
    Member
    Join Date
    Apr 2018
    Location
    Lebanon, TN
    Posts
    169

    Storage length - 920, Pro XS, 10 Bob's jack plate

    Looking at a 920 with swing tongue. Mercury Pro XS and 10" Bobs hydraulic jack plate.

    Unfortunately the boat is a day drive from me. I can ask the seller to measure it, but I am looking for other feedback.

    My garage is 24ft 4in.

    Will it fit?

    I can't we to find any numbers that indicate whether or not a jack plate is included.

  2.  
  3. Member Bartman's Avatar
    Join Date
    Apr 2010
    Location
    Russiaville, IN
    Posts
    975
    #2
    What year is the motor?

  4. Member
    Join Date
    Jan 2007
    Location
    Nevada, MO
    Posts
    1,048
    #3
    Yes, it will fit. I have a 721/250 ProXS in a 25' garage with a 10" atlas and I can squeeze around the end between the motor and the wall. No problem.
    2017 Phoenix 721/Merc 250 ProXS/Minn-Kota 112 Ultrex

  5. Member
    Join Date
    Nov 2008
    Location
    Porter, TX
    Posts
    1,213
    #4
    http://www.bbcboards.net/showthread.php?t=464768

    shows 920 only 2” shorter than 721 on trailer and he’s giving up 8” to your garage. Gonna be tight if it does. And to the OP, I think all 20+’ Phoenix come with a 10” or larger JP, so those measurements have to include one.
    2014 920/SHO

  6. Member
    Join Date
    Jul 2018
    Location
    De Pere, Wisconsin
    Posts
    31
    #5
    i have 18 920 with 18 Pro XS, 10inch Atlas w/ swing tongue in my 24 ft garage. I got like inches left to the door. You should be fine!!
    ​2018 Phoenix 920 ProXP. Mercury Pro XS 250. Power Poles Blades/Humminbird Helix 10 MEGA/Minnkota Ultrex 112

  7. Member
    Join Date
    Nov 2008
    Location
    Porter, TX
    Posts
    1,213
    #6
    Quote Originally Posted by 920Bassin View Post
    i have 18 920 with 18 Pro XS, 10inch Atlas w/ swing tongue in my 24 ft garage. I got like inches left to the door. You should be fine!!
    There ya go!
    2014 920/SHO

  8. Member
    Join Date
    Jul 2006
    Location
    Camanche, Iowa
    Posts
    4,005
    #7
    Quote Originally Posted by 920Bassin View Post
    i have 18 920 with 18 Pro XS, 10inch Atlas w/ swing tongue in my 24 ft garage. I got like inches left to the door. You should be fine!!
    When you say 24' is that the interior wall measurements? Just curious, because I've been looking at a 920 myself and even though my garage is classified as 24' I measure from the studs on the inside and its really only like 23' 5" or something like that.

  9. Member
    Join Date
    Nov 2011
    Location
    Pell City, AL
    Posts
    746
    #8
    Quote Originally Posted by buzzzzbait88 View Post
    When you say 24' is that the interior wall measurements? Just curious, because I've been looking at a 920 myself and even though my garage is classified as 24' I measure from the studs on the inside and its really only like 23' 5" or something like that.
    That is a good point that some people my overlook. Be sure to measure to the inside of the door ribs. They usually protrude past the door seal at least an inch. I just built a house and its funny how deceiving dimensions can be on paper.
    2015 Phoenix 819