Need a 4 blade prop for St Clair and Erie. Which one seems to fit these boats better?
Need a 4 blade prop for St Clair and Erie. Which one seems to fit these boats better?
-2016 Phoenix 721 250 Pro XS
-Old Rig-2006 Triton TR-196 200HP Optimax
I have a TR186 with 200 OPTIMAX with REVOLUTION4 P23 for big lake in Italy with rough water like st Clair and works very well.
2006 Triton Tr186 / 2011 Mercury 200 Optimax
I have a TR 196 and prefer the 23 Rev 4 and the 24 Bravo to the Trophy. I have not run a Fury 4. On my boat, the Bravo has a better hole shot and I like the way the Rev 4 carries the entire boat better. Haven't run either in real rough water so can't compare them there.
I run the Trophy Plus on my 196 under all conditions and like it.
Get the Fury 4. Great hole shot and the X7 Alloy is stronger than the Trophy. Fury 4 has 8 holes but leave them all unplugged. good speed too.
Some of the Trophy's are made of X7 too and have been for years. Get a Bravo xs it's better than the Fury 4 in rough water.
Everyone kind of throws a little of each back at me. No clear winner then.
When going from a 3 blade prop to a 4 blade how much pitch should you change?
-2016 Phoenix 721 250 Pro XS
-Old Rig-2006 Triton TR-196 200HP Optimax
If you change to a bravo up 1-2" in pitch and the other 4 blades down 1". On Erie the bravo will be the best for hole shot and rough water.
-2016 Phoenix 721 250 Pro XS
-Old Rig-2006 Triton TR-196 200HP Optimax
I have the same boat and motor and am running the 26P Trophy.
-2016 Phoenix 721 250 Pro XS
-Old Rig-2006 Triton TR-196 200HP Optimax
Couldn't figure out exactly what four blade I wanted so I just bought a different boat.
-2016 Phoenix 721 250 Pro XS
-Old Rig-2006 Triton TR-196 200HP Optimax
Bravo's are pitched light