It was only a matter of time before I screwed up the hex on the plug for UFP oil hubs.
Well it happened and I am going to have to use an EZ out to remove it. Is there anything special about it or can I just pick up what I find at a hardware store?
It was only a matter of time before I screwed up the hex on the plug for UFP oil hubs.
Well it happened and I am going to have to use an EZ out to remove it. Is there anything special about it or can I just pick up what I find at a hardware store?
2006 Triton TR196 w/ 200 Optimax \ 2021 AlumaRyder 1860 w/ 200 Rotax
I went through a few of them on my untill I went to my local Ace and got a regular NPT plug the size I needed. Had to grind off about a 1/4 in or so and put a cut in it for a flat head but works much better in my opinion.
2006 Stratos 294 Pro XL.2005 Yamaha 200 VMAX 3.1L. 8" Hydro Dynamics Rapid Jack. Ultrex 112 I-Plot link. 2 Helix 10 Chirp Mega SI GPS G2N.
I would think you could get it at a auto parts store or a good hardware store.
When you put the plug back in, add a layer or two of Teflon tape and it will seal good and come out easy the next time.