I have a 98 Johnson 200 (J200STLECE) that I am not getting spark on lower port side cylinder. I have been working on this for a bit.
I have the service manual and was running the Ohmmeter test on the sensor coil.
Using a Fluke MM I checked per the manual, Ohms on pin D to A, B, and C on both port and starboard connectors coming from coil.
Also did pin D to D from both connectors. That was in spec.
I got all similar readings on all tests except port side D to C which after I traced it on a schematic and did continuity test thru the power pack happens to be the lower port cylinder.
I havent taken the flywheel off yet but with all the experience here on BBC, does it sound like the sensor coil at this point?
Also, can someone verify that the flywheel nut is 1 7/16"

Appreciate all the help