What is the best way to remove it with out damaging anything.I am trying to clean behind it . It is on a 250 Sho Thanks
What is the best way to remove it with out damaging anything.I am trying to clean behind it . It is on a 250 Sho Thanks
Went to the auto parts store and rented a pulley puller and it came right off
Can usually use the butt end of a breaker bar and pry one side, then the other, and so on.
2017 Phoenix 819
2016 200ProXS, s/n 2B359849, Mod 1200P73BD
I watched the mechanic take mine off recently. He used a brass bar and a hammer and hit one side of the washer until it pops off the taper. For clarity he hit the top of the washer towards the lower unit.
I never suggest prying against the lower unit.
Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html
I have used a rubber dead blow hammer.
Use a long punch and a hammer. Tap the punch against the face of the thrust washer. That will free it.