Bilge pump kicked on suddenly yesterday. Put it on the trailer and started looking for the issue. Found this loose in the set back area with a hole where the housing had disintegrated. It was mounted next to the down scan transducer. I'm going to try to post a picture. BTW this is not the hole that drains the splashwell.
Anyone know what this is?
Thanks in advance!Boat Issue 1.jpgBoat Issue 2.jpg
Looks like the water temp sensor connected to a NEMA 2000 network, assuming you have a Lowrance sonar at the counsel.
2018 Z521L 250 PRO XS V8
Looks like one of the live well drains , the end to the left hose goes on it . look's like the face is gone on it .It should look the one in the boat .
The plumbing fittings do not have wires going into them as the part in the picture.
2018 Z521L 250 PRO XS V8
Exactly...going to have to resecure that. Should be able to access after removing charger, prop pad, and or battery.Originally Posted by howieranger
That should be warranty on a 17 if your the original owner.
Follow up - yes, this is a water temp sensor. Part number 307780 in case anyone else has this issue.
Thanks for the replies...
Reply With Quote