All,
I'm having a problem every so often I go out where my fuel line will run dry and be nothing but air, and I won't even be able to prime the line with the primer bulb. I let the motor sit for a while then I am able to prime it again with the primer bulb. I've hooked the engine up to the diagnostics software and tested the fuel pump; I can hear and feel the fuel pump running, and the diagnostics look good when monitoring while running.
Any ideas on what to look at? Only thing I can think of is there is some debris in the fuel tank and occasionally getting picked up and blocking the fuel pickup. It's a PITA to get access to the tank though on my boat as they didn't make an access panel.
Thanks.