2019 200 V8 4S
Serial # 2B591168
I bought the vessel view mobile for my 200 V8. I know it is supposed to be an easy plug and play. There should be some type of terminator resistor on the engine connector. For the Opti, it was yellow, but for the new 4S, apparently it is supposed to be red. I don't see any kind of removable terminator resistor at all. I know the connector on the module should plug into the engine cable on the far left of the first pic, but the terminator resistor that is supposed to come off of that is then supposed to go into the small pig tail. In the second pic you can see some type of purple cap on the small pigtail. I don't want to start making connections without some advice.
v8.jpgPIG TAIL.jpg