Pulled my prop off of my 112 for first time ( been a year) and I noticed that the prop has rubbed a grove in the lower unit housing. Is this normal?
Pulled my prop off of my 112 for first time ( been a year) and I noticed that the prop has rubbed a grove in the lower unit housing. Is this normal?
It is not the prop it is the collar on the prop. It is loose and if the prop is not check from time to time then you will wear a groove in the brush end housing. You can glue the collar back on the prop or change the prop. If you glue it make sure you glue it square.
Thanks