Results 1 to 10 of 10
  1. #1
    Member
    Join Date
    Sep 2017
    Location
    Blackstone, VA
    Posts
    29

    Atlas hydraulic jack plate setting

    Anyone running 2019 921 pro xp and atlas hydraulic jackplate? What setting is optimum for top end speed? Yes I know it will vary depending on load, water conditions, etc. just looking for the best range.

  2. Member
    Join Date
    Apr 2012
    Location
    Sumter, South Carolina
    Posts
    1,007
    #2
    15 for me. Heavier load drop down to 12-13
    Matthew 6:33
    2020 921elite

  3. Member Bartman's Avatar
    Join Date
    Apr 2010
    Location
    Russiaville, IN
    Posts
    1,919
    #3
    15 for me on a 2019 4S 920

  4. Member
    Join Date
    Nov 2017
    Location
    Chicago, Illinois
    Posts
    813
    #4
    Someone correct me if I am wrong, but the numbers on the gauge should really just be a reference and the p2p will change based on how its mounted on the boat. My 921 phx runs best in the 6-9 range.

  5. Member
    Join Date
    Feb 2010
    Location
    Maple Valley, Wa. State
    Posts
    2,315
    #5
    Quote Originally Posted by duncankopprichardson View Post
    Someone correct me if I am wrong, but the numbers on the gauge should really just be a reference and the p2p will change based on how its mounted on the boat. My 921 phx runs best in the 6-9 range.
    Depends on which hole in the motor mount is used to mount to the jack plate.
    "Everyone should believe in something; I believe I'll go fishing."

    -Henry David Thoreau

    Men and fish are alike. They both get into trouble when they open their mouths

    author unknown

    2015 Phoenix 919 225 Yamaha SHO


  6. Member
    Join Date
    Feb 2019
    Location
    Davie, FL
    Posts
    155
    #6
    Quote Originally Posted by duncankopprichardson View Post
    Someone correct me if I am wrong, but the numbers on the gauge should really just be a reference and the p2p will change based on how its mounted on the boat. My 921 phx runs best in the 6-9 range.
    What motor and prop are you running?

  7. Member Triton19x2's Avatar
    Join Date
    Jan 2010
    Location
    Rome, Ga.
    Posts
    2,664
    #7
    What prop are you running?
    Quote Originally Posted by Bartman View Post
    15 for me on a 2019 4S 920

    2019 721 ProXs 4S 250
    2B599739

  8. Member Bartman's Avatar
    Join Date
    Apr 2010
    Location
    Russiaville, IN
    Posts
    1,919
    #8
    Quote Originally Posted by Triton19x2 View Post
    What prop are you running?
    24P Fury 3 blade, no vent plugs

  9. Member
    Join Date
    Feb 2019
    Location
    Davie, FL
    Posts
    155
    #9
    do you have a picture or can you tell me what holes your motor is mounted to the jackplate?? My phx21 my p2p height for 3' is 17 on the gauge on my Atlas and I am running a 250 sho.

  10. Member
    Join Date
    May 2012
    Location
    Southern Illinois
    Posts
    79
    #10
    The sticker is dead nuts on my P2P
    2016 Phoenix 920,Garmin's 7600's, Power Poles,Lithium Pros,Rigid Industries