Results 1 to 4 of 4
  1. #1
    Member
    Join Date
    Feb 2007
    Location
    Ottawa, Ontario, Canada
    Posts
    640

    Question Start up beep stopped working.

    It was fine and then it wasn't. I heard it when I launched. Then my next start up it didnt work. Then my next start up it sounded "weak". Now it has stopped all together. Any idea where to start? MERCURY 2000 225 EFI
    Yes I am posting in Merc forum.


  2. Member
    Join Date
    Nov 2013
    Location
    Aurora MO
    Posts
    211
    #2
    Ya Don Weed and Joe will help you out better, but sounds to me like warning module is going bad
    1995 ChampioN 190 1995 Mercury 200 XRI Lowrance Ghost

  3. Member
    Join Date
    Feb 2007
    Location
    Ottawa, Ontario, Canada
    Posts
    640
    #3
    Update: So I have been tinkering tonight. I got underneath the console and made sure the beeper was free of obstruction. Then I pulled the cowling and snugged every electrical connection I could. I trimmed down and tried the key...BEEP! Ok good, problem solved. Tried it again and it worked. Trimmed up and it stopped again. Sounds like a loose connection somewhere at the outboard or in the plastic wiring harness running to the hull. Any other thoughts?


  4. Member
    Join Date
    Mar 2013
    Location
    High Ridge Missouri 63049
    Posts
    2,543
    #4
    I had a beeper replaced and that solved my issue. The original beeper was working intermittently.