93 364v Prop to pad?

[Bvizzy]

Was currious what my starting point should be for my 93 364v. I have a 93 intruder 150 14 1/2x 24 raker. A 4" manual jack plate. I also have 8' Talons but only 1 Lithium crank in the back. My trolling motor batteries are up in the middle of the boat and are lithiums as well. I keep the back absolutely light..and everything is dispersed evenly.
My question is where should i start for my prop to pad height. Thanks in advance for any help :)

[Fatshaft Merc]

3.5" below the pad.

[pmgoffjr]

I'd start at 4", OMC can't run as high as a merc/yamaha.
I suspect that 24 is going to be a bit stiff with a 150. Let's see what your rpms say.