How a nitro Z19 with a 175 on the back. Was a leftover 18 model new when I bought it. Went on the lake for my first time to do break in and wasting able to see anything other than about 5k rpm max and 56 mph. I feel like this is low.
I do have a hot foot installed from the dealer
i checked the throttle today and noticed I had a .08” gap on the throttle arm from what I can find should be about .02. Can you guys help or think of anything to check out for me.
would ask in nitro section for info , others there have your set up ,
.................................................. ...the scariest thing in life is the unknown ...................................
If you haven't read this you might want to - Optimax Engine Break-In
_______
Phil
'09 Hewescraft ProV
'09 150 Optimax
Also check out the FAQ Section for "Hotfoot Setup".
If you would, please take a moment to review the Announcements at the Top of the Forum, and be sure to provide the Required Info when posting. Thanks!
Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
Still consider myself a "Marine Apprentice" after 47 years (learn something new every day).
Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor
Reply With Quote
