Solix 12 transducer select

[gabepeeps]

I installed a dual spectrum shoot thru hull transducer in my boat. When I get on plane, I lose my 2d sonar. I want to know how do I know my unit is using the shoot thru hull transducer. There isn't a transducer select option like the Helixes. Just the sonar source option. Networked with a Solix on the bow. If the dual spectrum transducer wasn't connected, would Full Chirp be an option? Or would it not be there if that transducer wasn't connected?

[woody123]

Hook it straight to unit and try it

[Wayne P.]

With a SI first generation SOLIX, you have to tell the unit to use HB High CHIRP in the Setup menu and turn off
Auto Configure.

[fishon396]

How would it work with Gen 2, would you select another transducer ay high speed.

[Wayne P.]

How would it work with Gen 2, would you select another transducer ay high speed.

You do nothing with settings with the same installation.
The Y cable does not change anything except the location of the 2D piezo.

[Hollada]

I’m not sure which shoot thru the factory installed on my boat. Is there a way to tell? My depth readings are fine, but my sonar image really sucks. Very pixelated and basically useless.

[Wayne P.]

The transducer model is on a tag about 12 inches from the plug