I recently upgraded to a Helix 10msi g3n, using the software 1.840.
Made a couple of short trips on lake today, to grab some screen shots for advice on TD adjustment.
td 1.jpgtd 2.jpg
TD is 13 inches from center of prop, the port side of TD is even with the hull and is pitched down 2 degrees.
Here are couple of screen shots for evalution. snap1.PNGsnap2.PNG
I read about the issues with high speed depth readings and did encounter it at just over 26mph.
The other concern I have is the port Side image seems a bit darker and grainy, I tried trimming motor and reducing speed and it helps a bit.
Am considering moving TD closer to keel.
Wayne, what would you recommend?
Thanks