-
Flo torq hub removal
Trying to remove the drive sleeve from a Trophy Plus prop and can't get it to budge. Appears to be stuck and turned sideways got a screwdriver wedged in there and no luck. Any suggestions? TIA.
-
If it's a flo torq hub you just drive it out with a rod, a socket or something round from the nut end. Put the prop on two pieces of board with the square end down so you don't damage it and drive it out. How did it get turned side ways?
-
Moderator
Take out the aft adapter, Turn it 45* and set on top of the delrin drive sleve and hit it with a hammer... Make sure prop is not going to be in contact with anything that can damage it.