Did the update on both 12’ Live units before I headed out this morning and neither unit would give me temp. Tried deleting and reinstalling overlay but still no temp.
any idea as to what I did wrong?
Thanks
Did the update on both 12’ Live units before I headed out this morning and neither unit would give me temp. Tried deleting and reinstalling overlay but still no temp.
any idea as to what I did wrong?
Thanks
Wayne Carlson
2015 Ranger Z520C w/Evinrude 250 HO G2
2021 GMC Sierra AT4
Which unit? Live? Carbon? some folks with the Live have reported loss of data over-lay. Double check your temp source. Double check local/global scope on each unit.
It is a 12’ Live unit. It does not give me the global option. Thinking about going back to previous 18.3 to see if that works.
Wayne Carlson
2015 Ranger Z520C w/Evinrude 250 HO G2
2021 GMC Sierra AT4
You need to go turn it on. It's turned off on Simrad & I'm sure Lowrance.
Egret Moccasin 210 Mercury 225
I lost temp as well on CH1, my thru hull 83/200 for on plane sonar after the update. 3 n 1 temp still works for some reason
Always back up waypoints and SETTINGS first and then do a Hard RESET. SOP
Backing up settings is a bit of a joke any way you look at it. It absolutely does not back up "all" settings. You end up having to go through everything anyway to make sure it's like it was. For me - backing up settings was a waste of time and effort.
Went back to the 18.3 version and all is well
Wayne Carlson
2015 Ranger Z520C w/Evinrude 250 HO G2
2021 GMC Sierra AT4
Is there really no other way to fix this other than going back to 18.3? I noticed when I was selecting data sources that I was getting a temp reading at the bottom of the screen, leading me to believe that it's pulling data from the thru-hull. but when I select the thru-hull but after I've selected it and I go back to my operating screen, it would only display the (---)...
united in the pursuit of bass.
I had to reselect the temperature source.
- 2019 Ranger Z185 - Mercury 150 Pro XS
I did auto-reconfigure data sources and everything came back like I had it before the update.
i had to reselect the source.