I replaced the faulty Tie Down LP70 Master Cylinder as it was leaking. Filled the cylinder and primed it as the instructions said to do. Cracked open a caliber bleeder valve that was attached to a mini vac and got nothing out of it. Finally removed one of the bleeders and got nothing out of it at all. Reprimed the master cylinder several more times, added fluid., but get nothing out of any of the bleeders (both wheels). My next effort was going to be to remove the brake line at the t-fitting to see if I am getting fluid at least through the line, but wanted to check here first. Could bad calipers on both wheels be preventing the fluid from charging the system?
Thanks,
Brian
'06 Ranger 529VX 200hp Optimax