Results 1 to 4 of 4
  1. #1
    Member
    Join Date
    Jun 2010
    Location
    Decatur
    Posts
    3

    Best prop for ranger 519vx merc opti 200 hp

    Just wondering what people think best prop is for this boat,,,running 25p tempest plus,, 6 inch jack plate 200hp merc optimax GPS speed 65 loaded pretty heavy, boat and motor ‘06 model,, RPM’s 5370 to 5450 WOT,, in summer time, in winter,, max rpm’s 5500,, 67-68,,

  2. Member
    Join Date
    Jun 2004
    Location
    SC
    Posts
    4,114
    #2
    There is a similar thread being discussed on the Ranger board right now ..... and a 25" Tempest is what everybody runs (and what I used to run on mine). Set the prop shaft height at 3.25" below the pad. 3x Large PVS plugs. Mine typically ran 68-70 w/2 right on 5700rpm. I also had a 8" Slidemaster. Mine was a '01 518vx (same boat as yours).

    Good Luck.
    -391v
    '09 Ranger Z520 Silverado Edition / '09 Evinrude ETEC 250 HO
    '15 Xpress HD16DBX / Merc 59ci

  3. Member lpugh's Avatar
    Join Date
    May 2009
    Location
    Sacramento Ca
    Posts
    5,193
    #3
    24 tempest with only one very large pvs plug
    Thank You Leon Pugh

  4. Member
    Join Date
    Jan 2005
    Location
    Red Oak Va.
    Posts
    10,597
    #4
    25 tempest at 3.25 to start