Results 1 to 4 of 4
  1. #1
    Member
    Join Date
    Mar 2014
    Location
    Ocala, Florida
    Posts
    185

    Power pole pump has no power

    I was out fishing this weekend and it was working and then went to deploy it it has no power to the pump. The fuse was not blown. Not sure how to fix it.

  2. Natalie Gulbis tdt91's Avatar
    Join Date
    Jul 2007
    Location
    Abingdon, MD
    Posts
    6,604
    #2
    Call power pole. Check all you terminals /connections.
    2000 Javelin Renegade 20 DC.
    Strong men create easy times, Easy times create weak men & weak men create hard times. Sheikh Rashid bin Saeed Al Maktoum
    In 1944 18-20 year old's stormed beaches, and parachuted behind enemy lines to almost certain death.
    In 2015 18-20 year old's need safe zones so people don't hurt their feelings. "Author Unknown"
    In 2021 18-40 year old's want to and work to cancel you out if you have a different opinion.

  3. BBC SPONSOR
    Join Date
    Jun 2004
    Location
    South Florida
    Posts
    6,073
    #3
    Outside of double checking and triple checking your positive and negative we need to know what model / generation the unit is.

    Also check the fuse, not just by looking at it. Need to probe it just in case. Probe your leads to the pump as well.

    If its a Stealth pump it could be the relay pack.

    If it's CM1.0 could be the cap and board.

    If its a CM2.0 it could be the board.

  4. BBC SPONSOR/ Shallow Water Anchors Moderator
    Join Date
    Apr 2015
    Location
    New York
    Posts
    10,937
    #4
    Check to make sure no corrosion in the fuse holder itself, Take a test light and see if you have positibe power going to the pump AFTER the inline fuse holder on the pump side