SI interference

[DennisJensen]

I think it might be my jackplate. I had to move ducer from back of jackplate to transom there was a set of holes there already. Didn't want to make any new ones. Sorry i couldn't get of location of new spot. The boat is up at cabin at the moment

[11pounder]

Those lines are generally from the signal bouncing around inside the jackplate, but it may also be your lower unit, next time out trim up and see if they go away, if not then it's most likely the JP.

[DennisJensen]

I did trim all the way up and it didn't change. How much should i try to get bellow my plate to get clear image? Thanks

[Wayne P.]

I did trim all the way up and it didn't change. How much should i try to get bellow my plate to get clear image? Thanks

Put it a cover or holeshot plate on the bottom of the jackplate.

[DennisJensen]

Put it a cover or holeshot plate on the bottom of the jackplate.

Do i use cover as a mount or just to help with the interference?

[Wayne P.]

Do i use cover as a mount or just to help with the interference?

You can attach the transducer to the center of the cover, on the side of the jackplate, or on the transom.

You don't have "interference", the unit is doing what it is supposed to do=record sonar echoes. In your case it is recording echoes from the jackplate.

[DennisJensen]

Thanks for the help guys