I think it might be my jackplate. I had to move ducer from back of jackplate to transom there was a set of holes there already. Didn't want to make any new ones. Sorry i couldn't get of location of new spot. The boat is up at cabin at the moment
I think it might be my jackplate. I had to move ducer from back of jackplate to transom there was a set of holes there already. Didn't want to make any new ones. Sorry i couldn't get of location of new spot. The boat is up at cabin at the moment
Those lines are generally from the signal bouncing around inside the jackplate, but it may also be your lower unit, next time out trim up and see if they go away, if not then it's most likely the JP.
I did trim all the way up and it didn't change. How much should i try to get bellow my plate to get clear image? Thanks
Wayne Purdum
Charlottesville, Va.
Helix 12 CHIRP MEGA+ SI G3N/G4N, Helix 15 CHIRP MEGA SI+ GPS G4N
SOLIX 12 SI/G3, Helix 8 CHIRP MEGA SI+ G4N, Ultrex 80/LINK, MEGA360,
MEGA LIVE, LIVE TL
Wayne Purdum
Charlottesville, Va.
Helix 12 CHIRP MEGA+ SI G3N/G4N, Helix 15 CHIRP MEGA SI+ GPS G4N
SOLIX 12 SI/G3, Helix 8 CHIRP MEGA SI+ G4N, Ultrex 80/LINK, MEGA360,
MEGA LIVE, LIVE TL
Thanks for the help guys