Results 1 to 5 of 5
  1. #1
    Member Fish Boy's Avatar
    Join Date
    Nov 2012
    Location
    Okauchee, Wisconsin
    Posts
    5,558

    New prop on the 21ss

    Ever since I purchased this boat almost two years ago and it needed work and drove like complete crap but was too good of a deal to pass up. I rearranged the battery compartment and put all the batteries on the driver's side to take away the severe lean it had. That helped a lot! But it still leaned and yesterday I picked up a 24p Power Tech with added cup and all I can say is wow!!! No more bow hopping and I can stay on pad at 26mph and zero lean now. The bow rise isn't bad the hole shot is great, top end is about 64 and it turns so well! This prop took the place of a 24p tempest plus and it's on a 14' 225 pro xs.
    2018 Nitro Z21

    I'm better than you
    http://www.facebook.com/vincent.hytry

  2. Member
    Join Date
    Aug 2009
    Location
    Kings Mtn., Kentucky
    Posts
    8,870
    #2
    I would have figured that rig for a 70s mph. ride.

  3. Member Fish Boy's Avatar
    Join Date
    Nov 2012
    Location
    Okauchee, Wisconsin
    Posts
    5,558
    #3
    Flat water yesterday not a ripple, water temps at 65, air temps 55ish could only hit 58 with all the surface tension.

  4. Member
    Join Date
    Apr 2014
    Location
    SW, Ohio
    Posts
    17,456
    #4
    should hit 70 anyday? mine with a 200 hp hits 65 easily with 4 blade and two tall talons?
    2022 z519 cup 225 merc 4s ser # 3B210484. 2--hds12 live units. 2 poles, atlas plate, ghost, hamby's, active target, merc digital gauges
    2002 basscat pantera 3 (dad bought new) sold 8-2-22
    2000 stratos 20 ss (bought new) 200 hp Rude ficht great boat/motor sold 11-21
    pulled by a 2500HD Denali
    proud dad of an ARMY Captain
    MAGA
    ASE/GM Master tech before tools

  5. Member
    Join Date
    Nov 2008
    Location
    Raleigh NC / Falls Lake
    Posts
    11,210
    #5
    The problem was the Tempest Plus .....the 24 p is way off new out the box .Sent it to Mark C to be worked for your boat and motor ?