I need to replace my Fortrex . Can I just take the hexnut and remove motor and replace it without replacing complete trolling motor & bracket.
I need to replace my Fortrex . Can I just take the hexnut and remove motor and replace it without replacing complete trolling motor & bracket.
If you are replacing the motor ( pedal, head, shaft and motor) with another Fortrex ( not Ultrex) of the same length, you can use the old Fortrex bracket that's on the boat. I used a new motor from a friend on a two year old bracket once when I had not received my new motor yet. I don't understand the part about not replacing complete trolling motor. Do you mean replacing just the part that is in the water ? I don't think you can do that yourself.
Yes I don’t want to replace everything just the foot pedal and motor. Bbcboards
Disconnect the lift assist piston. THEN remove the hex socket head bolt.
Wayne Purdum
Charlottesville, Va.
Helix 12 CHIRP MEGA+ SI G3N/G4N, Helix 15 CHIRP MEGA SI+ GPS G4N
SOLIX 12 SI/G3, Helix 8 CHIRP MEGA SI+ G4N, Ultrex 80/LINK, MEGA360,
MEGA LIVE, LIVE TL
#3 Phillips screwdriver to remove the pin in the lift assist attachment.
Wayne Purdum
Charlottesville, Va.
Helix 12 CHIRP MEGA+ SI G3N/G4N, Helix 15 CHIRP MEGA SI+ GPS G4N
SOLIX 12 SI/G3, Helix 8 CHIRP MEGA SI+ G4N, Ultrex 80/LINK, MEGA360,
MEGA LIVE, LIVE TL
Thanks guys . I’m going fishing in the morning then I”ll probablyremove it.
In deployed position remove hex nut , lift motor off, replace with new motor and pedal.