Results 1 to 12 of 12
  1. #1
    Member mittenbass's Avatar
    Join Date
    May 2011
    Location
    Lake Orion, MI
    Posts
    1,229

    Debris in VST below filter

    2004 250XS serial no. OT819424

    My smart craft gauge was showing the “water in fuel” warning light so I drained the fuel from the VST and removed the filter. There was a fair amount of debris in the bottom of the filter housing in the VST. The debris looked like caramelized sugar. I cleaned it out and replaced the filter. The warning light is gone and my motor is running normally now, but I would like to find the culprit behind the debris. Does this sound like the inside of the fuel lines desintegrating or something else?

    I can’t find ethanol free gasoline near me that is above the minimum octane rating of 91 for my motor so I am forced to run pump gas with ethanol in it. To combat this, I have always put Quikcare ethanol treatment in every tank, but perhaps that is not enough?
    Brad Luchsinger

    2003 Allison XB-21 BasSport 2+2
    2004 Mercury Racing 250XS


    1998 Xpress X70
    1998 Yamaha Vmax 150 TRP

    2002 Triton 200XP

  2. Banned
    Join Date
    Feb 2007
    Location
    NV
    Posts
    9,120
    #2
    Yes, replace your fuel hose and bulb.

  3. Banned
    Join Date
    Feb 2007
    Location
    NV
    Posts
    9,120
    #3

  4. Banned
    Join Date
    Apr 2009
    Location
    Bridgewater, NS
    Posts
    9,054
    #4
    Quote Originally Posted by g352nv View Post
    Yes, replace your fuel hose and bulb.
    X2.
    The debris matches the description of fuel line inner lining pieces.

  5. Member
    Join Date
    Jun 2004
    Location
    Bentonia, MS 39040
    Posts
    3,356
    #5
    On the 300xs, what is recommended fuel line and bulb

    1e003823
    Ron Fears
    Stroker/300XS
    1E003823

  6. Member
    Join Date
    Jun 2004
    Location
    Bentonia, MS 39040
    Posts
    3,356
    #6
    And size
    Ron Fears
    Stroker/300XS
    1E003823

  7. Banned
    Join Date
    Feb 2007
    Location
    NV
    Posts
    9,120
    #7
    Quote Originally Posted by DewRonInc View Post
    On the 300xs, what is recommended fuel line and bulb

    1e003823
    Just take it off and take it with you to the shop or boat store ect. Or call Don he has it ready I'm sure.

  8. Member
    Join Date
    Jun 2004
    Location
    Bentonia, MS 39040
    Posts
    3,356
    #8
    Heck mine looks like 1/2 inch line
    Ron Fears
    Stroker/300XS
    1E003823

  9. Member rocketman6965's Avatar
    Join Date
    Mar 2014
    Location
    Lake Worth, FL
    Posts
    1,612
    #9
    3/8 from tank to primer bulb. 5/16 primer bulb to pulse pump.

    Joe Perez
    Boatless white trash

  10. Member
    Join Date
    Jun 2004
    Location
    Bentonia, MS 39040
    Posts
    3,356
    #10
    Mine is larger
    Ron Fears
    Stroker/300XS
    1E003823

  11. Member rocketman6965's Avatar
    Join Date
    Mar 2014
    Location
    Lake Worth, FL
    Posts
    1,612
    #11
    If it’s larger, it will leak at pump inside motor. Maybe looks larger because hose designed for under deck has thicker wall

    Joe Perez
    Boatless white trash

  12. Member
    Join Date
    Jun 2004
    Location
    Bentonia, MS 39040
    Posts
    3,356
    #12
    Dont really know, but I will.
    Ron Fears
    Stroker/300XS
    1E003823