Results 1 to 2 of 2
  1. 05-25-2019, 10:41 PM #1
    bCody
    bCody is offline
    Member bCody's Avatar
    Join Date
    Nov 2007
    Location
    Greenwell Springs, LA
    Posts
    681

    Solix SI/DI Issue

    I have not had this problem before, but the only thing that has changed is I have networked another Solix

    if my frequencies on my SI/DI are different, then my DI will stop reading. So, if my SI is on MEGA, and my DI on 455, then my DI will stop reading. Goes completely black.

    This is used to not be an issue at all. Any ideas?
    Cody // 2011 Phoenix 721
    Reply With Quote Reply With Quote
  2. bobcoy
    bobcoy is offline
    Member
    Join Date
    Apr 2008
    Location
    Lakeview,AR.
    Posts
    8,062
    #2 05-26-2019, 11:27 AM
    You will have to reset your network settings and set everything up again. That adding to the network is actually a pretty big deal. If things are set up with the global settings on,when you add that other Solix will input into the other unit and vs versa. It can be frustrating. Hang in there. Bob
    Note: You will be better off if both Solix are at the same software level.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »