seat upgrade question

[ammot23]

just rec'd my new seats for my 06 z21,when I ordered there was an option for a coin box,not the flip up middle seat,so I went that route,wich I like,but can some one tell me how this thing is supposed to mount in there,there is no pre drillrd holes or directions anywhere,thanks

[jc2bg]

There are two threads on coin box installation listed under “maintenance tips and tricks” at the top of this forum. Hopefully one of them [or both] will help.

[ammot23]

unfortunately it is not that style,it is the newer style that has the 2 cup holders in it,that actually wraps around the back of seats,if that makes sense .thanks

[bassinvol]

http://www.bbcboards.net/showthread....t=#post6226368

Before screwing into place, check the clearance of the rear compartment lids to the back of the seats.

[ammot23]

http://www.bbcboards.net/showthread....t=#post6226368

Before screwing into place, check the clearance of the rear compartment lids to the back of the seats.

exactly what I was looking for, could not find this thread at all,thank you for the help

[wmitch2]

Be very careful not to screw into the gas tank when installing the front screws !!!! You may have to go to a shorter screw.