1B190289 2005 PRO XS
What flush mount control box, 14 pin ignition harness and key switch do I need to buy for a 2005 Pro XS. It has shifter and throttle cables so I am assuming its non-DTS. Thanks.
1B190289 2005 PRO XS
What flush mount control box, 14 pin ignition harness and key switch do I need to buy for a 2005 Pro XS. It has shifter and throttle cables so I am assuming its non-DTS. Thanks.
you know what lenghth you need ????
.................................................. ...the scariest thing in life is the unknown ...................................
Which controls and harnesses you need, as well as what other components you will require, would depend on the boat you are rigging the engine to.
Good idea to start with some boat info (please also indicate what was rigged previously, as well as what rigging remains in the boat).
Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
Still consider myself a "Marine Apprentice" after 47 years (learn something new every day).
Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor
That would be correct, if you are re-using the existing control/harness. Your original post sounded like you wanted to replace everything (or had no rigging possibly).
Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
Still consider myself a "Marine Apprentice" after 47 years (learn something new every day).
Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor
I think you have 8 pin cannon plug , 896542T01 adapts to 14 pin
.................................................. ...the scariest thing in life is the unknown ...................................
No I want to replace what I have its 25 years old and the electrical gremlin I have does not give me a warm and fuzzy about making high speed runs in my boat. If the motor were to studder as I am taking a corner running 70 I could wreck and get hurt really bad. I would like to just rip the old harness out and install all new. Only sure way I know to get rid of a electrical problem I cant find.
Snap a picture of your existing controls/keyswitch locations and will be glad to help through our Parts Department. See Rhonda's post (pinned at the top of the forum).
Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
Still consider myself a "Marine Apprentice" after 47 years (learn something new every day).
Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor