-
Need some advice
I have a 1990 GT 200 that will not trim up it will trim down,I am certainly not a boat mechanic by any means but I cannot find any relays on this motor only a junction box,I really don’t know what to do,is this supposed to be like this or has somebody bypassed the relays,any advice would be appreciated.
-
SC Club Moderator
Look on the back of the block between the cylinder heads there should be a rectangular black plastic box with a hex screw on either side the relays live under there.
-
the Only thing it found is the trim wire goes in the back of a black box with a hex screw on each side,looks more like a junction box it’s not very deep,I can’t see any relays the you can remove in this box,But I’ll look again,Thanks for the help!
-
SC Club Moderator
Take the cover off and look inside. The relays are about as big as Ice cubes.
-
My motor does not have any relays in that box,the box is 4 1/4 “long by 3”high by 1”deep all it has in it are wires
-
SC Club Moderator
What can I tell you they were there at one time.