Results 1 to 3 of 3
  1. #1
    Member
    Join Date
    Jun 2009
    Location
    Bristol, VA
    Posts
    1,387

    Prop Identification

    I backed into a fence and bent my prop. I want to replace it and the only numbers I can find on the prop are in the hub and stamped on the outside. Anyone help me identify this prop size (see attached pictures) and which prop I need to replace it. I will stay with aluminum.
    Thanks
    Attached Images Attached Images
    1989 Coleman Crawdad
    55 lb Minn Kota Endura Max

  2. Member
    Join Date
    Feb 2018
    Location
    Kennesaw, Georgia
    Posts
    3,148
    #2
    The K15 is telling you that it is a Yamaha K series propeller with a 15" diameter. The 6E5 is telling you the prefix for the part number.

  3. Member
    Join Date
    Jun 2009
    Location
    Bristol, VA
    Posts
    1,387
    #3
    Thank you very much. I researched it before I posted and found that part number also but wanted to be sure before I ordered. 13.5 diameter 15 pitch is confirmed. Usually they stamp that on the side of the prop.. I couldn't find anything about the 0403a that is stamped on the side of the one I bent. It must be an aftermarket.
    1989 Coleman Crawdad
    55 lb Minn Kota Endura Max