I have a 2018 z18 with a 175 proxs 2 stroke. Running a 24 fury. I have moved the jackplate 2" in each direction from the original set up. I even measured off of another set up.I can not get over 56mph and 5000rpm. Any suggestions?
I have a 2018 z18 with a 175 proxs 2 stroke. Running a 24 fury. I have moved the jackplate 2" in each direction from the original set up. I even measured off of another set up.I can not get over 56mph and 5000rpm. Any suggestions?
Hotfoot?
Possibly not allowing WOT.
Oh, and welcome to the boards... The crew here will likely be able to help get your issues sorted out.
Who controls John Gill?
Yes on the hotfoot. What is WOT?
Wide open throttle
Sometimes if the are not installed correctly it won't actually be getting max throttle at the engine.
Ok thanks. I will check.
Be mindful of your water pressure when drastically moving the motor up. 12 psi is as low as you want to be at WOT.
Hotfoot was out of adjustment bad.
Thanks
Who controls John Gill?
Thanks again
So how fast you going now? I have a 2018 Z18 with a 150 and running 56-57mph.
Michael J. Koenig