-
'94 Evenrude trim switch
Need help finding a fitting replacement switch for my new to me '98 Javelin 389dc w/ '94 150hp Evinrude. The one for the tip of the throttle handle.
-
SC Club Moderator
Shift to reverse. Carefully remove the rubber cover over the neutral lock out button. Remove the Phillips screw and remove the nylon shift button. On the bottom of the shift handle there is a small opening, insert a 1/8" Allen wrench and loosen the set screw. the shift lever will pull off the the stalk towards you. Use a dry erase marker and mark the gunnel so you can get the handle back in the same place after replacement.
-
Ummm, I'm wired up to that switch location, just missing the switch. Needing the correct switch part # for replacement.
-
SC Club Moderator
0395821 is your part number, you'll still need to take the handle off to install the new one.