-
Prop/Setup Suggestions
Hey Guys, I'm looking at a new prop and also an idea of what height to set me jackplate at.
Current Setup:
'97 Stratos 282
2012 Etec 200 2.6l
6" manual jackplate set at 3.25" below pad
24 Raker II
Loaded with 2 guys I hit 62mph at 5900rpm
The hole shot is..okay and top speed should be better in my opinion. I'm going to move the jackplate around and see what happens, just looking for some ideas now. I'm not sure if the plate needs to go up or down at this point with all the slip I am getting at WOT, there is little to no rooster tail.
-
Have the prop worked to get rid of the slip and you'll save some money.