Results 1 to 14 of 14
  1. #1
    Member
    Join Date
    Apr 2009
    Location
    ME
    Posts
    624

    New Trailer Tires Suggestions

    What brand is everyone using for trailer tires? I am not impressed with how my Goodyear Marathons are wearing and am going to make a switch.
    Phoenix 2021 721 ProXP
    250 V8 ProXS

  2. Moderator 21XDC's Avatar
    Join Date
    Sep 2004
    Location
    Westland Michigan
    Posts
    63,448
    #2
    The New GoodYear Endurance is the best choice as of today...

    Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html

  3. Electrical/Wiring/Trolling Motors Moderator CatFan's Avatar
    Join Date
    Jun 2004
    Location
    SW Indiana
    Posts
    26,088
    #3
    If you have wear issues, it’s likely a trailer issue rather than a tire issue. Trailer tires age out long before they should show enough wear to see.
    If you have integrity, nothing else matters. If you don't have integrity,
    nothing else matters.​

  4. Member
    Join Date
    Dec 2013
    Location
    Glynn, Louisiana
    Posts
    150
    #4
    I bought 4 new endurance today and so far very
    impressed. Running 55 psi and hardly any flex
    in the side walls.

  5. Member Iowa Bass Hunter's Avatar
    Join Date
    Aug 2010
    Location
    Iowa
    Posts
    5,071
    #5
    Ditto on the Endurance. I've had two different boats and trailers. Both had tire wear problems. I finally put a heavier springs on and the Endurance tires. No more issues.

  6. Member Stroker3.2XS's Avatar
    Join Date
    May 2005
    Location
    Harrison, AR
    Posts
    1,538
    #6
    Purchased the Endurance tires in February and all good so far

  7. Member Jeff Homan's Avatar
    Join Date
    Oct 2016
    Location
    MS
    Posts
    377
    #7
    Gladiator tires on my bug trailer.
    2019 BassCat Puma FTD, Honda 250, Croxton Razor 4XL,Garmin Force, Power Pole Blades & Charge, Atlas JP, Ionic 36v Lithium, K2 Energy Lithium NoCo GenPro10x1, All Garmin Electronics with PanOptics LiveScope

    jefflhoman.com

  8. Banned
    Join Date
    Dec 2011
    Location
    chgo hts Il
    Posts
    1,866
    #8
    Quote Originally Posted by Jeff Homan View Post
    Gladiator tires on my bug trailer.
    WHAT.?

  9. Member
    Join Date
    Feb 2007
    Location
    St. Louis
    Posts
    2,066
    #9

    USA

    "Talon man" Check your tire pressure.. I thought the Endurance was 80 psi

  10. Member Islands's Avatar
    Join Date
    Jul 2011
    Location
    LKA, VA
    Posts
    730
    #10
    Quote Originally Posted by ROADRUNNER View Post
    "Talon man" Check your tire pressure.. I thought the Endurance was 80 psi
    80 psi would be LR "E" - not typically needed for a bass boat.

  11. Electrical/Wiring/Trolling Motors Moderator CatFan's Avatar
    Join Date
    Jun 2004
    Location
    SW Indiana
    Posts
    26,088
    #11
    Quote Originally Posted by ROADRUNNER View Post
    "Talon man" Check your tire pressure.. I thought the Endurance was 80 psi
    65psi max for LRD.
    If you have integrity, nothing else matters. If you don't have integrity,
    nothing else matters.​

  12. Member tcbass's Avatar
    Join Date
    Jun 2010
    Location
    Buffalo, NY
    Posts
    3,174
    #12
    Just took my GY Marathons in today to get looked at as they were making a loud noise when I’d first start driving then the noise stopped after 2 minutes of driving. The guy at the shop told me over the phone today they showed significant inside wear. They mounted two new GY Endurance on my rims and I will pick up tomorrow AM when I get out of work. Now I have to worry about what is causing the wear? I replaced the axle on my EZ Loader trailer a few years ago under warranty they covered it. Hopefully the new axle isn’t starter to go bad again?

  13. Electrical/Wiring/Trolling Motors Moderator CatFan's Avatar
    Join Date
    Jun 2004
    Location
    SW Indiana
    Posts
    26,088
    #13
    Quote Originally Posted by tcbass View Post
    Just took my GY Marathons in today to get looked at as they were making a loud noise when I’d first start driving then the noise stopped after 2 minutes of driving. The guy at the shop told me over the phone today they showed significant inside wear. They mounted two new GY Endurance on my rims and I will pick up tomorrow AM when I get out of work. Now I have to worry about what is causing the wear? I replaced the axle on my EZ Loader trailer a few years ago under warranty they covered it. Hopefully the new axle isn’t starter to go bad again?
    Your axle is overloaded.
    If you have integrity, nothing else matters. If you don't have integrity,
    nothing else matters.​

  14. HYDRA SPORT LS205 225HO JER-1 BIG BASS's Avatar
    Join Date
    Mar 2011
    Location
    Proctorville Ohio
    Posts
    3,517
    #14
    Quote Originally Posted by Talon man View Post
    I bought 4 new endurance today and so far very
    impressed. Running 55 psi and hardly any flex
    in the side walls.
    Run what ya want but those tires at least my good year endurance tires call for 65 psi