Mounting new Noco Genius Gen3

[theflyguy]

Hey guys,

Not sure where to ask this question...

I just spent some $$$ to get a new cranking battery, as the last one died in only 2 years. Found out that the Z18's only have a two bank charger, so when I thought I was charging all my batteries I found out the hard way I wasn't!!!!

I decided to get a new NOCO Genius Gen3 (30amp - 3-10amp) to charge both of my trolling and my cranking battery.

When I pulled out the storage compartment I found that the space where the 2 bank charger is located too small to mount the new 3 bank charger horizontally.

Question...has anyone mounted their charger vertically (so the cables are coming out the side vs. the bottom)???? Have your found any issues doing so??

I sent NOCO an email but haven't heard back...

[BoatNoobie]

it took you 2 years to realize your cranking battery wasn't being charged??


You can mount it any orientation.

[STRETCH1]

You can mount it any way you like.

[lpugh]

I mounted my 4 bank upside down on the deck lid to so I could keep the bilge area free of clutter

[McGinnis_Fishing16]

Just run the wires so there is a loop down so water can't run down the wire and seep into the unit.