I just installed a 12" Atlas Jackplate on my boat, wired it per instructions. When I plugged the main power blue and green wires
together(from the motor to the wiring harness) as described, the jackplate motor came on and bottomed out, toggle switch would
not change anything. I quckly unplugged them and rechecked my wiring, even changed the top and bottom wires on the switch.
Still the same thing. I unplugged the main wires from motor and plugged the green to blue and vice versa, motor traveled to the
top and the motor still ran until i unplugged the green and blue wires. While at top I did hit the switch, one way stopped the motor
from trying to travel(letting off the switch, the motor tried to travel more with no place to go. When I tried the switch in the other
direction, nothing. Therefore unplugged the blue and green power wires. Any ideas??????