Would a 13 foot shift cable be long enough with a 12" jackplate on a 20XD? Mine snapped this weekend. Thank you in advance. Also I bout a bobs lower with 1.75 gears I'm running a Croxton 28 pitch prop. Any idaes what I should be running tournament loaded? 1.5 below pad. 2003 250xb stock.
Last edited by Fador; 04-21-2019 at 08:17 PM.
If that's a coned lower you need to raise it up to about 1.25 above the pad on a 20 ftr. I didn't have any trouble running mid 80s with a 300xs . I think the xb were some stout motors the mid 80s should be doable
2020 Allison XB 21
Merc 300R
2018-SST Bullet
Merc 300R
Bullet 20XD
300XS DBR
Your cable will have the length stamped on it not too far from the motor end. Itll have a part number then a dash length
xpress x19, 200ho G2, aluminum sawtooth cut prop, paper sack tackle storage, ugly stik pro team, color c-lector
Thank you guys for your help. I appreciate it.
Reply With Quote