Most sensitive rods I own, really enjoy feeling the slightest tick or thump that I know I wouldn’t feel with other rods. All 3 of these rods has lost the first guide below the top of the rod. Have any of you experienced the same problem?
Most sensitive rods I own, really enjoy feeling the slightest tick or thump that I know I wouldn’t feel with other rods. All 3 of these rods has lost the first guide below the top of the rod. Have any of you experienced the same problem?
You use braid?
Nitro z21
Have a bunch of NRX’s both spinning and casting; not a problem with any of them.
Last edited by Pro-Hunt; 04-20-2019 at 12:18 AM.
Charger 210 Elite
Same, and I have had a couple of mine since they came out, I also use braid with a leader.Originally Posted by Pro-Hunt
Maybe your leader knot is taking them out.
No issues with mine. Rod tube damage?
Never would use braid om my G Loomis.
2015 Ranger RT188
2015 115 PRO XS
use braid no leader or FC line on mine since they came out. No issues.
2024 Phoenix 818
2024 merc 175 pro xs 3B411947
Never had an issue 6 NRX rods. 4 spinning 2 casting. All good
I have 3 that I use a lot and I've never had a problem.
Have several. Never had an issue.
Never an issue with any of them at all . It's about all that I own, probably 20 or 25 total. I use braid ,mono, and flouro .
They have a lifetime warranty
why? It’s a rod, a tool, an expensive one but just a rod my gosh.
I have lost guides from top to bottom on my nrx rods. My fault the rods fault hell I dunno. I just run them to my buddy Mosley and have him put a new one on.
Fluorocarbon only, guess it’s me being to rough with them
Likely the case I asked about braid as maybe a wind knot pulled out the guide common on the top of the rod. Nrx are awesome blanks but the build quality is highly questionable. A simple locking wrap would eliminate your problem however with their build quality I doubt they utilize a locking wrap for the guides
Nitro z21
Sounds like something youre doing honestly. I have several and have never lost an eye and i use em pretty much every trip out. Could be rod tube damage, i did take them out of my boat
They aint got hands, set the hook
It’s not braid.
If they are all failing at the same point, I would look at how you store them. Do you use rod tubes in the rod locker?
"I am going to Eufala to just idle around"
-Haus
***NEW*** 2023 Ford F150 XLT Super Crew 2.7L Ecoboost FX4 cause I am such a baller.
2021 Phoenix 721/ Mercury 250 ProXS 4s with a bent ass trailer
HDS16 live- Solix15 : Console
HDS16 live W/AT - Garmin 126 W/ lvs34 - Solix12/ 360 : Bow
Dual 10' Blades/ Lowrance Ghost/ Bobs Hydraulic Plate
225ah cranking / 100ah trolling. Ionic/Relion lithium
Instagram @brettcarnright. Teamviewer: bCarnrite@33
No problems with mine floro only on mine but I don't use braid for anything but frogs and my frog rods are not NRXs.
When I use braid if I use a leader, it's short, so I don't have to cast it thru the giuides.
Reply With Quote
