Which cable(s) do I need to connect US2 sonar and livescope box to Ultra 106sv

[mossie3]

From browsing here it appears the box only comes with a 2m length cable, and I prefer to mount it near the console in the rod box. Garmin's website isn't helpful, and the installation manual is of no help, with no part numbers.

Is this the US2 adapter I will need?- Ultrex adapter US2 for Garmin part #MKR-US2-14
Is this the longer cable I will need?- Garmin Marine Network cable small connector 6 meter Part # 010-12528-01

install diagram.JPG

[fishin couillon]

Depends where you install your box, you may need to extend the transducer cable with this extension: https://buy.garmin.com/en-US/US/p/pn/010-12855-00

As for the Network cable small connector, that looks to be the one.

For the Ultrex adapter, that looks correct also but you will need to get the Garmin 8-pin Transducer to 12-pin Sounder Adapter Cable with XID - Garmin part number 010-12122-10 since the Ultra has a 12 pin connection.

https://www.garmin.com/en-US/search/?query=010-12122-10

Why not use the transducer that comes with the unit??? Dont quote me on this but i dont think that US2 transducer is chirp capable.

Hopefully someone can verify this before you buy.....

[mossie3]

Thanks for the reply.

I currently have a HB Solix at the console networked to another Solix at the bow, with a HB transducer mounted on the trolling motor. I'm planning on using the Garmin primarily for livescope and connected to the US2 Ultrex sonar as a backup.

I'm wanting to have all the parts, cables I need on hand when I'm ready to install it.